Ms

[bgjaya 0]

I am using PIC16LF1937 processor and want to configure the MSSP module in I2C mode. 

 

But while I try to do the configuration through code configurator v3 (MPLAB v5.35), it does not allow the selection of I2C and is always selected as SPI. I am unable to change it. 

 

How to make the MSSP work in I2C mode?

 

thanks for your support

[N9WXU 51]

 

Wow, this release seems pretty broken.

I even tried to use FoundationServices i2c simple master.  That installed, but did not get the underlying i2c master driver created so it cannot compile.

 

[N9WXU 51]

It is pretty hard to use on my 4K monitor as well.

[Orunmila 46]

Sounds like a bug in the latest MCC, have you tried an older version?

 

[Orunmila 46]

I tested it and from v1.80.0 of the PIC10/12/16 library onwards this seems to be broken. If you open the "Versions" tab and find the previous version it still works fine. You can switch to the old version in the IDE. It looks like this on my machine.

 

Right-click on the 1.78.1 version and select Mark library for load and then press the load button at the top next to where it says "Versions" it will appear. After doing this I bet it will work just fine.

It builds. I will attach the project for you also.

 

[Orunmila 46]

Here is the project I generated, sorry for the random name 🙂

wdqwd.zip

[Orunmila 46]

If you load that project it should load with the working version.